POSTER PRESENTATIONS

2019 ICP EPA POSTER PRESENTATIONS

IMPORTANT: Approved poster presenters are listed below by Presenting Author- alphabetical (Last Name, First Name). If you submitted a poster abstract and do not find your name and abstract title below… contact the ICP administration office to ensure your poster will be presented.

Registration: Poster presenters are required to register and pay conference fees. All poster authors must pay registration fees and confirm attendance prior to July 1, 2019. Failure to do so may result in your abstract being removed from poster competition and Conference Program Book.

Abu-Awwad, Motasum
WHEN TO DO CUSPAL COVERAGE FOR POSTERIOR VITAL TEETH AND ENDODONTICALLY TREATED TEETH?

Abuzar, Menaka
REMOVABLE PROSTHODONTIC PRESCRIPTIONS: HOW DO STUDENTS COMPARE WITH CLINICIANS?

Agop-Forna, Doriana
LASER-ASSISTED MINIMAL INVASIVE THERAPY IN DENTISTRY

Agop-Forna, Doriana
STUDY REGARDING CLASSIC VERSUS ERBIUM LASER-ASSISTED FRENECTOMY IN THE PROPROSTHETIC STAGE

Ahn, Minzin
DYNAMIC FUNCTIONAL IMPRESSION TECHNIQUE USING TISSUE CONDITIONER FOR MANDIBULAR REMOVABLE PARTIAL DENTURE: A CASE REPORT

Akin, Ceyda
APPLICATION OF IMPLANT SUPPORTED BAR PROSTHESIS TO ANGLED ABUTMENTS

Al Ameri, Muna
INVESTIGATING THE AFFECT OF ELIMINATING THE SILANATION STAGE BY INCLUSION WITHIN RESIN-CEMENTS WHEN ADHERING CERAMICS

Al-Sahan, Maha
DEVELOPING A METATHEORY OF HOW PEOPLE MANAGE TOOTH LOSS

Alamri, Ahmed
SIX-YEAR CLINICAL PERFORMANCE OF CAD/CAM LITHIUM-DISILICATE GLASS CERAMIC VERSUS METAL-CERAMIC CROWNS: A SPLIT-MOUTH CLINICAL TRIAL

Almazrooei, Banan
THE ORAL HEALTH STATUS OF ATTENDEES AND RESIDENTS IN UAE CARE HOMES

Alsaggaf, Arwa
EFFECT OF DENTURE WEAR ON RESIDUAL RIDGE IN EDENTULOUS PATIENTS: CASE CONTROL STUDY

Alshikh, Ayesha
EFFECTIVENESS OF SPRAY DISINFECTANTS ON DENTAL IMPRESSIONS

Altıntaş, Sebile
PROSTHETIC REHABILITATION OF A BRUXIST PATIENT WITH SEVERE DENTAL WEAR

Amichia-Alloh, Yomin Cécile
INNOVATION IN THE DESIGN OF THE PALATAL PLATE OF IMMEDIATE OBTURATOR PROSTHESES

Appelbaum, Marc A
NEW DEVICE TO PREVENT ASPIRATION OR SWALLOWING OF IMPLANT SCREWDRIVERS

Arıkan, Hale
IMMEDIATE PROVISIONALIZATION OF AN IMPLANT PLACED IN FRESH SOCKET  FOR THE REPLACEMENT OF MAXILLARY INCISOR

Arya, Deeksha
A PILOT COMPARATIVE SINGLE AND TWO IMPLANT SUPPORTED OVER DENTURES STUDY

Auskalnis, Liudas
EFFECT OF INTRAORAL SCANNER, PRINTER AND DIGITAL ANALOG SYSTEM ON ACCURACY OF 3D PRINTED MODELS

Avukat, Esra Nur
CYTOTOXIC EVALUATION OF ZIRCONIUM OXIDE NANOPARTICLES ADDITIVE TO ACRYLIC BASE MATERIAL

Avukat, Esra Nur
INFLUENCE OF DIFFERENT ARGON PLASMA IRRADIATION TIME ON SHEAR BOND STRENGTH OF Y-TZP ZIRCONIA RESIN INTERFACE

Aygun Cimentepe, Elif
DIGITALLY FABRICATED GLASS-CERAMIC VERSUS NANOCERAMIC VENEERS: A SPLIT-MOUTH STUDY

Bagis, Bora
EFFECT OF NON-THERMAL PLASMA ON THE BOND STRENGTH OF GLASS CERAMICS WITH RESIN CEMENTS

Basso, Matteo
EVALUATION OF THE ACCURACY AND PRECISION OF 5 INTRAORAL DIGITAL SCANNERS: AN IN-VIVO 3DIMENSIONAL ANALYSIS

Batak, Burcu
EFFECT OF HOME BLEACHING TREATMENT ON THE TRANSLUCENCY OF NOVEL CAD-CAM CERAMIC MATERIALS

Bei, Maria
THE USE OF THE COPY DENTURE TECHNIQUE TO FABRICATE A TREATMENT DENTURE. A CASE REPORT

Bellia, Elisabetta
IMMEDIATE LOADING OF MANDIBULAR OVERDENTURES RETAINED BY TWO MINI-IMPLANTS: 3 YEARS FOLLOW UP RESULTS

Berze, Ildikó
PROSTHETIC CLASSIFICATION OF MISSING TEETH PROVIDING POSSIBLE TREATMENT OPTIONS

Bhandari, Sudhir
FACTORS AFFECTING MOUTH OPENING IN HEAD AND NECK CANCER PATIENTS: PRELIMINARY DATA IN 322 PATIENTS

Bhandari, Sudhir
RETAINING INTERIM OBTURATOR IN COMPLETELY EDENTULOUS PATIENTS WITH BILATERAL MAXILLECTOMY

Biagioni, Annalisa
LEARNING CURVE OF AN INTRAORAL DIGITAL SCANNER ON SOUND TEETH

Bianchi, Alessandro
17-YEAR FOLLOW-UP OF 26 IMPLANT-RETAINED REMOVABLE PARTIAL DENTURES

Biçer, Mehmet A
NALYSIS OF MARJINAL DISCREPANCY OF METAL-CERAMIC CROWNS WITH LASER SINTERING METHOD

Bicheru, Madalina
DRY MOUTH SYNDROME AND ORAL HEALTH IN NURSING HOME RESIDENTS WITH COMPLETE DENTURES

Bocca, Norma
DIFFERENCES BETWEEN A TRADITIONAL AND AN INNOVATIVE METHOD OF IMPRESSION TO RESTORE A MAXILLOFACIAL DEFECT

Bortolini, Sergio
TORONTO “SNAP”: A NEW TECHNIQUE IN FIXED IMPLANT PROSTHODONTICS

Bujak, Bartosz
EVALUATION OF USING A SINGLE IMPLANT AS A SUPPORT ELEMENT FOR THE LOWER

Burduroglu, Defne
IN-VITRO COMPARISON OF MECHANICAL AND PHYSICAL PROPERTIES OF VARIOUS PROVISIONAL RESTORATION MATERIALS

Cai, Xinjie
A THERMOSENSITIVE CHITOSAN-BASED HYDROGEL FOR SEALING AND LUBRICATING PURPOSES IN DENTAL IMPLANT SYSTEM

Cal, Ebru
COMPARISON OF ADHESIVE BONDING EFFECTIVENESS OF RESIN-CEMENTS AND FLOWABLE-COMPOSITES IN LUTING GLASS-CERAMICS TO DENTINE

Carrabba, Michele
CEMENT OPACITY AND COLOR AS INFLUENCING FACTORS ON THE FINAL SHADE OF CERAMIC RESTORATIONS

Celebic, Asja
MINI-IMPLANTS SUPPORTED KENNEDY CLASS I REMOVABLE PARTIAL DENTURES – A 3-YEAR FOLLOW-UP OUTCOMES

Chalazoniti, Aspasia
TELESCOPIC REMOVABLE RESTORATION IN THE MAXILLA – A CASE REPORT

Charvát, Jindřich
IMPLANT AND ROOT – SUPPORTED OVERDENTURES AND FUCTION OF MECHANORECEPTORS

Chatziparaskeva, Maria
LLLI EFFECT ON BIOLOGICAL BEHAVIOR OF IMPLANT ABUTMENT MATERIALS

Chen, Ji-hua
PROPERTIES OF URETHANE-BASED ADHESIVES WITH DIFFERENT CONCENTRATION OF ACETONE

Chen, Maggie Hsiao-Mei
RELIABILITY OF RFA IN ASSESSING IMPLANT STABILITY: A RETROSPECTIVE ANALYSIS

Cheng, Hui
APOPTOTIC AND AUTOPHAGIC EFFECTS OF DENTAL ALLOYS MANUFACTURED BY DIFFERENT METHODS BASED ON 3D OMM

Chu, Rosemary
COMPLICATIONS WITH REFURBISHING OF IMPLANT-SUPPORTED FIXED DENTAL PROSTHESES: A CASE REPORT

Chu, Cheng An
AN ALTERNATIVE DIRECT-INDIRECT METHOD TO FABRICATE MULTIPLE CASTING POST-AND-CORES IN SEVERELY WORN DENTITION

Chuka, Richelle
PREDICTIVE FACTORS OF OUTER CORTEX LOSS IN ADVANCED JAW RECONSTRUCTION

Çiçekci, Gökhan
REHABILITATION OF MAXILLARY DEFECT WITH IMPLANT SUPPORTED SCREW RETAINED HYBRID PROSTHESIS – A CASE REPORT

Claudio Contreras, Lisseth Patricia
SURFACE GAS-PHASE FLUORINATION FOR BONDING MONOLITHIC ZIRCONIA RESTORATIONS

Cross, Laura
TOOTH AUTO-TRANSPLANTION: AN ALTERNATIVE OPTION FOR ANTERIOR SINGLE TOOTH REPLACEMENT

Damlaj, Ousama
DIAGNOSIS AND EARLY MANAGEMENT OF A HIGH SMILE LINE PARTIALLY EDENTULOUS PATIENT: A CASE REPORT

D’Arienzo, Luigi Federico
LEARNING CURVE OF AN INTRAORAL DIGITAL SCANNER ON NATURAL ABUTMENTS

Daya Roopa, Variza
REHABILITATION OF AN UNUSUAL PRESENTATION OF OSSIFYING FIBROMA WITH COMPLICATIONS

Delucchi, Francesca
IMPLANT-PROSTHETIC REHABILITATION USING ZYGOMATIC IMPLANTS AND A CARBON FIBER FRAMEWORK

Deng, Hongyan
CURATIVE EFFECT OBSERVATION OF OCCLUSAL RECONSTRUCTION WITH INCREASING OCCLUSAL VERTICAL DIMENSION

Deniz, Sule Tugba
IMPROVEMENT IN ORAL-HEALTH QUALITY OF LIFE AFTER STABILIZATION SPLINT TREATMENT FOR TEMPOROMANDIBULAR DISORDER

Deshpande, Saee
PERFORMANCE OF MANDIBULAR IMPLANT RETAINED OVERDENTURE: EFFECT OF ATTACHMENT TYPE ON PATIENTS’ SATISFACTION

Dholam, Kanchan
RETROSPECTIVE CASE SERIES OF REHABILITATION OF FACIAL DEFECTS WITH PATCH PROSTHESIS

Dian, Arturo
EVALUATION OF THE ACCURACY OF 4 INTRAORAL DIGITAL SCANNERS WHEN USED BY UNTRAINED DENTIST

Ding, Qian
EFFECTS OF DIFFERENT MICROSTRUCTURED SURFACES ON THE OSSEOINTEGRATION OF CAD/CAM ZIRCONIA DENTAL IMPLANTS

Dirse, Julius
REPOSITIONING ACCURACY OF IMPLANT PROSTHETIC COMPONENTS USED FOR DIGITAL AND CONVENTIONAL WORKFLOW

Dutt, Pranjali
KNOWLEDGE AND PRACTICE ABOUT ORAL HYGIENE BY TRIBAL WOMEN OF UTTAR PRADESH-A COMMUNITY BASED STUDY

Elbashti, Mahmoud
FEASIBILITY OF INTRAORAL SCANNERS IN DIGITIZING MAXILLECTOMY DEFECTS: AN IN VIVO STUDY

Elovaara, Anton
EFFECT OF BONDING AND POST LENGTH TO THE DISLODGEMENT CHARACTERISTICS OF FIBER REINFORCED COMPOSITE POST

Elshahawy, Waleed
CERAMIC COATING OF DENTAL IMPLANT NECK FOR ESTHETIC AND ORAL HEALTH IMPROVEMENT

Erdinç, Gülbahar
EVALUATION OF PHASE TRANSFORMATIONS OF PRESINTERIZED MONOLITHIC ZIRCONIA BLOCKS AFTER SINTERING

Ergül, Mustafa KaanAlp
EFFECT OF REPEATED FIRINGS ON BIAXIAL FLEXURAL STRENGTH OF MONOLITHIC ZIRCONIA

Fasoula, Maria
TRANSLUCENCY OF MONOLITHIC ZIRCONIA AFTER AGING. A SYSTEMATIC REVIEW

Faydali, Özge
THE EFFECT OF DENTURE CLEANERS ON THE COLOR PARAMETERS OF ARTIFICIAL DENTURE TEETH

Ferrari Cagidiaco, Edoardo
RCT ON LITHIUM DISILICATE PARTIAL CROWNS USING A NOVEL PROSTHODONTIC FUNCTIONAL INDEX FOR TEETH (FIT)

Forna, Norina
DIGITAL IMPLANT PLANNING AND GUIDED IMPLANT SURGERY: A CLINICAL CASE

Forna, DoriIana
STUDY REGARDING CLASSIC VERSUS ERBIUM LASER-ASSISTED FRENECTOMY IN THE PROPROSTHETIC STAGE

Frugone Zambra, Raul
FINDING OCCLUSAL PLANE ORIENTATION BASED ON SKULLS MORPHOLOGY, OCCLUSOMETRY AND VD-METER

Fukazawa, Shota
ACCURACY AND REPRODUCIBILITY OF ABUTMENT POSITION IN INTRAORAL AND EXTRAORAL SCANNING

Gallo, Giulia
A RANDOMIZED CONTROLLED TRIAL OF TWO LITHIUM DISILICATE PARTIAL CROWNS: 3-YEAR RESULTS

Gao, Jing
MINIMALLY INVASIVE TOOTH PREPARATION WITH CUSTOMIZED 3D PRINTED GUIDE IN DIGITAL CERAMIC VENEER RESTORATION

Garg, Deepti
CORRELATION BETWEEN THE STEEPNESS OF THE ARTICULAR EMINENCE AND OCCURENCE OF ANTERIOR DISC DISPLACEMENT

Gassino, Gianfranco
EFFECTS OF AN INTRAORAL STENT ON SIDE EFFECTS OF RADIATION THERAPY

Gedrimiene, Agne
IN VITRO STUDY ON DIGITAL SPLINT EFFECT TO THE ACCURACY OF DIGITAL DENTAL IMPLANT IMPRESSION

Grossi, Marcio
CURRENT METHODS OF BRUXISM DIAGNOSIS

Gugnani, Neeraj
EVALUATING THE CLINICAL SUCCESS FOR CROWNS FABRICATED WITH A NOVEL COMPOSITE BASED MATERIAL

Habibzadeh, Sareh
DOES SELECTION OF POST AND CORE MATERIAL INFLUENCE THE FRACTURE STRENGTH OF ENDODONTICALLY TREATED TEETH?

Han, Tianxiao
RNA-SEQ ANALYSIS OF RBMMSCS ON TIO2 NANOTUBE ARRAYS

Han, Ying
CIRCRNA CDR1AS REGULATED THE PROLIFERATION AND OSTEOGENIC DIFFERENTIATION OF HUMAN PERIODONTAL LIGAMENT STEM CELLS

Hasanzade, Fidan
EVALUATING THE COLOR STABILITY OF VARIOUS DENTURE LINERS: COMPARISION OF CIE AND CIEDE 2000 FORMULAS

Hasanzade, Fidan
FUNCTIONAL AND ESTHETIC REHABILITATION OF A YOUNG PATIENT WITH AMELOGENESIS IMPERFECTA

Hatta, Kodai
OCCLUSAL FORCE PREDICT DECLINE IN COGNITIVE FUNCTION IN 3-YEAR

Hatta, Minori
EFFECT OF PRIMING AGENTS ON SHEAR BOND STRENGTH OF IPN FIBRE-REINFORCED-COMPOSITE

Hayashi, Shoji
LONG-TERM PERFORMANCE OF ELECTROFORMING TELESCOPIC DOUBLE CROWN REMOVABLE PROSTHESES

Hong, Seoung-Jin
COMBINING CONVENTIONAL IMPRESSIONS AND INTRAORAL SCANS FOR THE MANAGEMENT OF FLABBY TISSUE

Huang, Cui
HIGH-PERFORMANCE THERAPEUTIC RESVERATROL-DOPED ADHESIVE FOR ADHESIVE-DENTIN INTERFACES

Huang, Po-Ju
EVALUATION THE STRAIN DISTRIBUTION BETWEEN MILLED, 3D PRINTING AND CONVENTIONAL DENTURE BASE

Huang, Bo
REPEATED FRACTURES OF THE FIXED IMPLANT-SUPPORTED METAL-ACRYLIC PROSTHESES: A CASE REPORT

Hutkin, Kristin
TUNABLE NANOLAYERED TITANIUM DENTAL IMPLANTS COATINGS FOR ENHANCED OSSEOINTEGRATION

Ikawa, Tomoko
REPRODUCIBILITY OF SCANNED 4 SILICONE IMPRESSIONS VIA A LABORATORY SCANNER

Imre, Marina
DIGITAL AESTHETIC PREVIEW FOR EDENTULOUS PATIENTS. A CASE REPORT

Isik-Ozkol, Gul Bahar
IMPLANT-SUPPORTED OVERDENTURE TREATMENT COMPLICATIONS

Isik-Ozkol, Gul Bahar
THE ORAL HEALTH-RELATED QUALITY OF LIFE IN PATIENTS TREATED WITH IMPLANT PROSTHESES

Iwaki, Maiko
COMPLICATIONS OF IMMEDIATE LOADING OF TWO-IMPLANT MANDIBULAR OVERDENTURES: 5-YEAR PROSPECTIVE STUDY

Jang, Gaejun
SPEECH IMPROVEMENT USING PALATAL LIFT PROSTHESIS IN MYOPATHY PATIENTS

Kaffaf, Berk
KNOWLEDGE OF REMOVABLE PARTIAL DENTURE DESIGN AMONG DENTISTS, DENTAL TECHNICIANS AND STUDENTS IN TURKEY

Kane, Brittany
A STEM CELL-LADEN PHOTOCROSSLINKABLE ADHESIVE HYDROGEL FOR TREATMENT OF PERI-IMPLANTITIS

Kaptanoglu, Asena
PARTIAL LAMINATE VENEERS IN BROKEN TEETH – CASE SERIES

Kara, Ozlem
THE EFFECT OF ER:YAG LASER ON LAMINATE VENEER CERAMICS SURFACE ROUGHNESS

Karsila, Ville
CLINICAL EVALUATION OF SHORT-FIBER REINFORCED COMPOSITE RESIN RESTORATIONS AND GLASS-CERAMIC ENDOCROWNS IN ENDODONTICALLY TREATED MOLARS

Katheng, Awutsadaporn
EFFECT OF STEREOLITHOGRAPHY POST-CURING IN DIFFERENT CONDITIONS ON THE FITTING ACCURACY OF PHOTOPOLYMER 3D RESINS

Katsunuma, Shotaro
EFFECT OF CHEMICAL PRE-TREATMENT ON SHEAR BOND STRENGTH WITH TWO DIFFERENT SELF-ADHESIVE RESIN CEMENTS

Kaya, Umut
FULL-DIGITAL PROTOCOL FOR THE DESIGN-FABRICATION OF MONOLITHIC FELDSPATHIC CERAMIC ENDOCROWNS LUTED SEMI-ERUPTING PERMANENT FIRST MOLARS

Khan, Sadika
ARE SYSTEMATIC REVIEWS THE PANACEA FOR EVIDENCE BASED DENTISTRY?

Kim, Myung-Joo
FULL-MOUTH REHABILITATION WITH VERTICAL DIMENSION INCREASE AND COMPUTER TOMOGRAPHY GUIDED IMPLANT SURGERY

Kim, Soyeun
MANDIBULAR ALL-ON-4 IMPLANT RESTORATION CONSIDERING MAINTENANCE

Kim, Sun Jong
POSTERIOR MAXILLARY OSTEONECROSIS OF JAW RELATED DENTAL IMPLANTS : A RETROSPECTIVE STUDY

Kim, Ye-Ji
COMPLETE DENTURE REHABILITATION OF EDENTULOUS PATIENTS USING SUCTION DENTURE: A CLINICAL REPORT

Kim, Jinwan
CLINICAL EVALUATION OF LITHIUM DISILICATE PRESSED ZIRCONIA AND MONOLITHIC ZIRCONIA IN POSTERIOR IMPLANT-SUPPORTED PROSTHESES

Kim, Jinseon
ACCURACY OF IMPLANT IMPRESSION TECHNIQUES:COMPARISON BETWEEN CONVENTIONAL AND DIGITAL METHOD

Koga, Sayuri
IMPACT OF ORAL HYGIENE INSTRUCTION ON MAXILLOFACIAL PROSTHETIC PATIENTS

Koishi, Yukiko
ELUCIDATION OF PATHOPHYSIOLOGY WITH A LONGITUDINAL STUDY OF SUBCHONDRAL CYST UTILIZING MRI IN TMD PATIENTS

Kokkoni, Magdalini
RESIN BONDED BRIDGES AS A TREATMENT OF CHOICE: CLINICAL BEHAVIOR AND UPDATED CONSIDERATIONS

Koli, Dheeraj Kumar
MASTICATORY EFFICIENCY AND BITE FORCE CHANGES IN COMPLETE DENTURE WITH OR WITHOUT SOFT LINER

Kovacic, Ines
MARGINAL BONE LOSS IN SHORT MINI-DENTAL IMPLANTS AS COMPLETE MANDIBULAR OVERDENTURE RETAINERS: 1-YEAR COHORT STUDY

Kuoppala, Ritva
IMPACT OF PAIN-RELATED DISABILITY ON TREATMENT OUTCOME IN TMD PATIENTS

Kusumoto, Yuriko
EFFECTS OF TYPES OF IMPLANT PROSTHESES ON ORAL HEALTH-RELATED QUALITY OF LIFE IN EDENTULOUS PATIENTS

Kwon, Kung-Rock
CEMENTLESS FIXATION(CL.F) SYSTEM: A NOVEL TYPE OF DENTAL IMPLANT PROSTHESIS

Lalama, Martin
3D ACCURACY ANALYSIS BETWEEN HEAT-PRESSED AND CAD-CAM POLYETHERETHERKETONE (PEEK) POST AND CORE RESTORATIONS

Lan, Yi-Hao
DESIGN OF SUBSTRUCTURE AND SUPRASTRUCTURE FOR EXCESSIVE VERTICAL RESTORATION SPACE: A CASE REPORT

Lee, Jae-Hyun
IMPLANT-ASSISTED REMOVABLE PROSTHESIS DESIGN FOR A PATIENT WITH RECURRENT AMELOBLASTOMA: A CLINICAL REPORT

Lee, Jong Hyuk
SHEAR BOND STRENGTH BETWEEN CAD/CAM DENTURE BASE AND ARTIFICIAL TEETH USING RESIN CEMENT

Lee, Jeong-Yol
TREATMENT OUTCOMES OF MANDIBULAR ISRPD IN KENNEDY CLASS I PATIENTS: A SYSTEMATIC REVIEW AND META-ANALYSIS

Lee, Hyeonjong
A DIGITALLY OPTIMIZED OCCLUSION CONCEPT ON IMPLANT PROSTHESES

Lee, Younghoo
COMPLETE DENTURE FABRICATION USING NON-DENTAL CAD SOFTWARE WITH CUSTOMIZED RESIN BLOCKS

Li, Yan
EVALUATION OF SPEECH IMPROVEMENT FOLLOWING OBTURATOR PROSTHESES FOR PATIENTS WITH PALATAL DEFECT

Liang, Shanshan
DIGITAL-CONVENTIONAL METHODS FOR ORAL REHABILITATION OF DEFECTIVE AND SEVERELY WORN DENTITION: A CASE REPORT

Lin, Hui-Yi
SWING-LOCK REMOVABLE PARTIAL DENTURE IN MANDIBLE WITH FEW REMAINING TEETH: A CASE REPORT

Linardou, Maria
APPROACHING THE PARTIALLY EDENTULOUS MANDIBLE THROUGH GUIDED IMPLANT PLACEMENT AND IMMEDIATE LOADING

Loster, Jolanta
EVALUATION OF THE EFFECTIVENESS OF TEACHING TMD EXAMINATION USING THE RDC/TMD AXIS I

Luchetti, Cesar
SCREWED FRAMEWORK WITH ABUTMENTS FOR CEMENTED PROSTHESIS IN COMPLEX IMPLANT CASES

Ma, Sunyoung
ARE DIGITAL IMPRESSIONS AS ACCURATE AS TRADITIONAL DENTAL IMPRESSIONS?

Mahapatro, Rama Kanta
EVALUATION OF MARGINAL MICROLEAKAGE OF FIXED PROVISIONAL CROWNS WITH TEMPORARY LUTING AGENTS

Makihara, Eri
EVALUATION OF THE COMPLIANCE OF TWO TYPES OF ORAL APPLIANCES FOR FIVE PATIENTS WITH OSA

Masumi, Shin-ichi
A CASE OF LOWER REMOVABLE PARTIAL DENTURE WITH STUD, INTRACORONAL AND EXTRACORONAL DENTAL MAGNETIC ATTACHMENT

McKenna, Katy
ABUTMENT SCREW LOOSENING IN ANGULATED IMPLANTS AT VARYING DEGREES: AN IN VITRO STUDY

Medic, Vesna
AESTHETIC MANAGEMENT OF PATIENTS WITH CONGENITAL ANOMALIES–CASE REPORT

Meng, Dan
A CASE OF IMPLANT RESTORATION IN AESTHETIC AREA OF ANTERIOR TEETH

Michael, Michael
COMPARISON OF DIFFERENT METHODS FOR REHABILITATION OF MAXILLARY DEFECTS

Milic Lemic, Aleksandra
THE IMPACT OF NEW DENTURES ON SALIVARY STRESS MARKERS VALUES IN COMPLETE DENTURES WEARERS

Mishra, Niraj
A STUDY TO EVALUATE THE EFFICACY OF CERROBEND SHIELDING STENTS IN PREVENTING ADVERSE RADIOTHERAPEUTIC EFFECTS

Miura, Shoko
EVALUATION OF ABUTMENT TOOTH COLOR, CEMENT COLOR, AND DIFFERENT THICKNESS OF COMPUTER-AIDED DESIGN/COMPUTER-AIDED MANUFACTURING BLOCKS

Miyoshi, Keita
EFFECTS OF DIFFERENT TYPES OF INTRAORAL SCANNERS AND SCANNING RANGES ON DIGITAL IMPRESSION PRECISION

Molinero Mourelle, Pedro
FIT AND MICROLEAKAGE OF IMPLANT-SUPPORTED ABUTMENTS

Montaldo, Enrico
RETROSPECTIVE ANALYSIS OF IMPLANT PROSTHETIC REHABILITATIONS OVER A PERIOD OF 25 YEARS

Mori, Daizaburo
PROPOSAL FOR FABRICATION OF MODELS NEXT GENERATION MATERIAL

Morita, Miyako
COMPARISON OF MANDIBULAR MOVEMENTS BETWEEN CAD AND CONVENTIONAL ARTICULATOR

Motevasselian, Fariba
A REVIEW ON MONOLITHIC TRANSLUCENT ZIRCONIA

Mothopi-Peri, Matshediso
IS THERE A PLACE FOR THE REMOVABLE PARTIAL DENTURES IN THE POST IMPLANT ERA?

Motta, Chiara
FIBRONECTIN ADSORPTION AND OSTEOBLASTIC RESPONSE OF A ROUGH TITANIUM SURFACE COMPARED TO MACHINED TITANIUM

Mounajjed, Radek
MINI INVASIVE GINGIVAL RETRACTION BY USING ELECTROSURGERY

Murat, Sema
FABRICATION OF OBTURATOR PROSTHESIS BY USING DIGITAL TECHNOLOGY

Nagaoka, Kento
MECHANICAL PROPERTIES AND MICROSTRUCTURE OF NOVEL LITHIUM DISILICATE GLASS CERAMIC BLOCK FOR CAD/CAM

Nakai, Nobuyuki ORAL
HEALTH-RELATED QOL OF NON-METAL CLASP DENTURES AND SDA WITH UNILATERAL MANDIBULAR DISTAL-EXTENSION EDENTULISM

Nakazato, Yukari
INHIBITORY EFFECTS OF VIBRATORY STIMULUS VIA AN OCCLUSAL SPLINT ON SLEEP BRUXISM

Narimatsu, Ikue
EPITHELIAL AND CONNECTIVE TISSUE SEALING AROUND TITANIUM IMPLANTS WITH VARIOUS TYPICAL SURFACE FINISHES

Naveau, Adrien
3D-PRINTING OFFERS NEW IMPRESSION PROCEDURES TO OVERCOME SEVERELY LIMITED MOUTH OPENING: ABOUT TWO CASES

Nethononda, Portia Tshimangadzo
DESIGN AND FABRICATION OF A FACIAL PROSTHESIS WITH IMMEDIATE LOADING FOLLOWING RHINECTOMY

Nikitina, Evija
REDUCED BONE MINERAL DENSITY ASSOCIATION WITH RADIOGRAPHIC SIGNS OF DEGENERATIVE JOINT DISEASE IN THE TMJ

Nishiyama, Hirotaka
FABRICATION OF REMOVABLE PARTIAL DENTURES BY FULLY DIGITALIZED WORKFLOW: A CASE REPORT

Niu, Lin
CORROSION BEHAVIOR OF PASSIVE FILMS ON VITALLIUM CASTING ALLOY IN SIMULATED ORAL ENVIRONMENT WITH FLUORIDE

Nowak, Magdalena
CHANGE IN THE CONCENTRATION OF VOLATILE SULFUR COMPOUNDS IN PATIENTS USING REMOVABLE DENTURES

Ogawa, Toru
ELECTROMYOGRAPHIC ANALYSIS OF MASSETER MOTOR UNIT ACTIVITY USING MULTI-CHANNEL SURFACE ARRAY-ELECTRODES WITH MODIFIED SPIKE-TRIGGERED AVERAGING

Ogino, Yoichiro
CLINICAL ASSESSMENT OF MAXILLARY SINUS FLOOR AUGMENTATION USING CARBONATE APATITE : A 30-MONTH FOLLOW-UP STUDY

Öğünç, Abdurrahman
COMPARATIVE EVALUATION OF THE SHEAR BOND STRENGTH OF TWO RESIN CEMENTS TO METAL ALLOYS

Ogut, Sevgi
EVALUATION OF OHIP-14 SCORE OF PATIENTS WITH IMPLANT SUPPORTED OVERDENTURE PROTHESIS

Okazaki, Yohei
ANTIBACTERIAL DENTAL ADHESIVE CONTAINING CETYLPYRIDINIUM CHLORIDE MONTMORILLONITE

Omondi, Ben
COMBINED PROSTHODONTIC AND SURGICAL MANAGEMENT OF PATIENTS WITH AMELOGENESIS IMPERFECTA: CASE SERIES OF THREE PATIENTS

Ordueri Kilavaz, Tugce Merve
MAXILLARY MOLAR INTRUSION BY USING MINI IMPLANTS FOR PROSTHETIC REHABILITATION: CASE REPORT

Ortensi, Luca
A FULLY DIGITAL WORKFLOW CHANGES THE APPROACH TO DENTISTRY: A CASE STUDY

Osman, Latib
Yasmin A PRELIMINARY STUDY ON THE ACCURACY AND COST OF A DIGITAL WORKFLOW FOR METAL-BASED FRAMEWORKS

Ou, Shiu Fong
MANAGING ANGULATED IMPLANTS IN ATROPHIC FULLY EDENTULOUS MAXILLA WITH IMPLANT SUPPORTED OVERDENTURE

Owen, C Peter
CROSS CONTAMINATION DURING DENTURE FABRICATION

Ozen, Funda
EVALUATION OF CAD/CAM CERAMICS’ COLOR STABILITY ON DIFFERENT SURFACE FINISHING TREATMENTS AFTER ARTIFICAL AGING

Özmen, Mehmet Fatih
MULTIDICIPLINER MANAGEMENT OF MISSING MAXILLARY LATERAL INCISORS IN PATIENT WITH OBLIQUE OCCLUSAL PLANE: CASE STUDY

Özmen, Mehmet Fatih
PERI-IMPLANT SOFT TISSUE HEALING WITH USING PROVISIONAL RESTORATIONS AFTER FLAPLESS POSTEXTRACTION SOCKET IMPLANT PLACEMENT

Pan, Shaoxia
THE ACCURACY OF INTRAORAL SCANNING OF EDENTULOUS JAWS WITH AND WITHOUT RESIN MARKERS

Pantea, Mihaela
COMPARATIVE STUDY ON DIMENSIONS OF 3D PRINTED DENTAL MODELS OBTAINED AFTER INTRAORAL AND EXTRAORAL SCANNING

Papavasiliou, George
EXPLORING DIFFERENT MODULES FOR THE RESTORATION OF THE EDENTULOUS MAXILLA

Park, Taemin
RETROSPECTIVE CLINICAL EVALUATION OF IMPLANT-ASSISTED REMOVABLE PARTIAL DENTURES COMBINED WITH IMPLANT SURVEYED PROSTHESES

Parra, Carlos
DIGITAL SMILE DESIGN IN THE INTERDISCIPLINARY MANAGEMENT OF AN ATTRITION PATIENT, 4Y FOLLOW-UP

Pei, Dandan
DOES PROBIOTIC LACTOBACILLUS HAVE THERAPEUTIC EFFECT ON PERI-IMPLANT DISEASES: A SYSTEMATIC REVIEW AND META-ANALYSIS?

Pei, Dandan
EFFECT OF NANO-HYDROXYAPATITE CONTAINING DESENSITIZING TOOTHPASTES ON THE BONDING PERFORMANCE OF TWO SELF-ETCH ADHESIVE SYSTEMS

Pesson, Delon Muller
FIXED PROSTHODONTICS IN COTE D’IVOIRE, WEST AFRICA: KNOWLEDGE AND PRACTICES OF CAD/CAM

Phang, Zi Ying
HYBRID DIGITAL–ANALOG WORKFLOW IN FABRICATING ORBITAL PROSTHESIS: A CASE REPORT

Qafmolla, Alketa
THE BIOLOGICAL PRINCIPLES OF THE TEETH PREPARATION FOR FIXED RESTORATION (EXPERIMENTAL – CLINICAL STUDY)

Qianju, Wu
STUDY ON THE CLINICAL EFFECT OF DIFFERENCE BETWEEN DIGITAL AND TRADITIONAL IMPRESSION FOR FIXED RESTORATION

Radke, Usha
EVALUATION OF CAUSES AND CONSEQUENCES OF TOOTH WEAR IN ADULTS: A CROSS SECTIONAL STUDY

Radovic, Katarina
THE CELLULAR RESPONSE OF DENTURE –BEARING TISSUES ON MECHANICAL STRESS IN DIABETIC CONDITIONS

Rahmat, Maria
THREE-DIMENSIONAL ACCURACY OF IMPLANT ANALOGS IN THREE-DIMENSIONAL PRINTED RESIN MODELS

Ramamoorthi, Murali
ORAL HEALTH TECHNOLOGY ASSESSMENT OF PROSTHODONTIC MANAGEMENT OF BILATERAL DISTAL EXTENSION

Rani, Padmini
BIOMECHANICS OF IMMEDIATELY LOADED IMPLANTS BASED ON ALL-ON-FOUR CONCEPT- IN VITRO STUDY

Regazzoni, Alberto
LASER SURFICE TEXTURING TO GUIDE IMPLANT ROUGHNESS: A PRELIMINARY SURVEY ON OSTEOBLAST ADHESION

Rizonaki, Maria
COMPARATIVE ANALYSIS OF INTERNAL AND MARGINAL FIT OF LITHIUM-DISILICATE CAD-CAM CROWNS WITH DIFFERENT FINISH LINES

Roulet, Jean-Francois
STRENGTH OF A ZIRCONIUM OXIDE CERAMIC PRODUCED WITH AN ALTERNATIVE PRODUCTION PROCESS

Roy, Marco
ECM-RELATED GENE EXPRESSION IN FIBROBLASTS ABUTMENTS MATERIALS: TIO2, ZRO2 AND PEEK THE EFFECTS OF UVC PHOTOFUNCTIONALIZATION

Sa, Yue
MULTIDISCIPLINARY APPROACH FOR FUNCTIONAL AND ESTHETIC IMPLANT SUPPORTED RECONSTRUCTION IN THE AESTHETIC AREA 

sahin, dilara
THREE PATIENTS TREATED WITH DIFFERENT HYBRID PROSTHESIS: CASE SERIES

Şahinbas, Abdurrahman
THE FLEXURAL STRENGTH, SURFACE HARDNESS AND SURFACE ROUGHNESS OF 3D PRINTED DENTURE BASE MATERIAL

Salazar Marocho, Susana Maria
ER,CR:YSGG LASER THROUGH Y-TZP CERAMIC FOR DEBONDING PURPOSES: PULSE RATE EFFECT AT LOW POWER SETTINGS

Santana, Roberto
EFFECTS OF TWO SYSTEM POST ON FAILURE PATTERNS ON ENDODONTICALLY TREATED MANDIBULAR PREMOLARS.

Sarafianou, Aspasia
OCCLUSAL REHABILITATION OF CLASS II ADULT PATIENTS USING A PROSTHODONTICS-CENTERED MULTIDISCIPLINARY APPROACH: A CLINICAL REPORT

Sato, Naoko
FIBULAR RECONSTRUCTION OF MANDIBULE WITH VIRTUAL SURGICAL PLANNING

Sayin, Bahar
THE ASSESSMENT OF DIFFERENT GINGIVAL MANAGEMENT MATERIALS FOR THE IMMEDIATE IMPLANT TREATMENT IN THE AESTHETIC-ZONE

Sayin, Bahar
FOLLOW-UP AFTER 6 MONTHS OF DEFINITIVE SINGLE IMPLANT-SUPPORTED CROWNS IMPRESSIONED BY USING HIND’S TECHNIQUE

Sayin Ozel, Gulsum
COMPLICATIONS OF DIFFERENT PROSTHETIC DESIGNS AND MATERIALS FOR ALL-ON-4 PROSTHESIS

Schimmel, Martin
ROOT-RETAINED OVERDENTURES: SURVIVAL OF ABUTMENTS WITH PRECISION ATTACHMENTS ON GOLD CAPS DEPENDS ON OVERDENTURE DESIGN

Seckin, Ozge
COMPARISON OF PEKK (POLY-ETHER-ETHER-KETHONE) AND ZIRCONIA BASED DIFFERENT CERAMIC VENEER SYSTEMS ON THE FRACTURE RESISTANCE

Shakibpour, Mani
AESTHETIC CONSIDERATIONS OF ANTERIOR FIXED RESTORATIONS

Shanker, Rama
EVALUATION OF CLINICAL OUTCOME IN EARLY LOADED IMPLANTS WITH DIFFERENT IMPLANT SYSTEM

Shigemoto, Shuji
NEW CONCEPT OF ROTATION AXIS FOR ANALYZING MANDIBULAR MOVEMENTS

Shinya, Akikazu
EFFECT OF CAVITY DEPTH ON BOND STRENGTH OF DIFFERENT TYPES OF BULK FILL COMPOSITES

Shoji, Takumi
PHYSICAL PROPERTIES OF NEW HYBRID RESIN BLOCK FOR CAD/CAM

Singh, Raghuwar Dayal
EVALUATION FOR LEACHING OF SUBSTANCES FROM DIFFERENT DENTURE BASE MATERIALS- AN IN-VIVO STUDY

Slaidina, Anda
THE IMPACT OF GENERAL BONE MINERAL DENSITY ON THE EDENTULOUS MANDIBLE

Sohmat, Phibadahun
AN EVALUATION OF THE EFFICACY OF TWO PROSTHESIS IN PALATOPHARYNGEAL INCOMPETENCY PATIENTS

Sone, Mineyo
AESTHETIC EVALUATION OF PERI-IMPLANT SOFT TISSUE – THE INFLUENCE EXERTED BY THE OBSERVER’S CLINICAL EXPERIENCE

Song, Young-Gyun
STUDY ON PHYSICAL PROPERTIES AND EFFECT ON OSSEOINTEGRATION BY SURFACE TREATMENT OF ZIRCONIA

Sozen Yanik, Irem
TOOTH – SUPPORTED OVERDENTURES RETAINED WITH ROOT CANAL ANCHORS: CASE SERIES

Su, Ting-shu
PROPERTIES OF NOVEL DENTAL ZIRCONIA MATERIALS: A PILOT STUDY

Sultan, Mohamed Mones
ALTERED DIGITAL MODEL IMPRESSION TECHNIQUE (NOVEL 3D-DESIGN OF CUSTOM TRAYS FOR EDENTULOUS IMPRESSION)

Sun, Jian
TRANSLUCENCY AND MICRO-SHEAR BOND STRENGTH OF NOVEL DENTAL ZIRCONIA MATERIALS :A PILOT STUDY

Symeonidis, Panagiotis
INVESTIGATION OF MICRO-STRUCTURAL AND NANO-MECHANICAL PROPERTIES OF MONOLITHIC ZIRCONIA CERAMICS BEFORE AND AFTER IN-VITRO AGING

Takaoka, Ryota
PROSTHODONTIC RECOVERY OF A PATIENT WITH SEVERE CENTRAL INCISORS ROOT RESORPTION ASSOCIATED WITH IMPACTED CANINES

Tan, Ken
TELECONSULTATION IN DETERMINATION OF TOOTH RESTORABILITY

Tan, Zhi Hui Janice
3-D POSITIONAL AND MATING ACCURACY OF INTRAORAL AND LABORATORY IMPLANT SCAN BODIES

Tancu, Ana Maria Cristina
CORRELATIONS BETWEEN GENERAL HEALTH STATUS AND MATERIALS USED FOR THE SUBTOTAL EDENTULOUS PATIENT TREATMENT

Tangül, Mustafa Burak
TWO DIFFERENT RETENTION SYSTEMS FOR A BAR RETAINED OVERDENTURE

TAS, Nevin
SHEAR BOND STRENGTH OF RESIN CEMENT TO ZIRCONIA CERAMIC AFTER ALUMINUM OXIDE SANDBLASTING

Tealdo, Matteo
ONE STAGE TECHNIQUE VS TWO STAGE TECHNIQUE FOR PLACEMENT OF EXTRA-SHORT IMPLANTS: A MULTICENTER STUDY

Tezvergil-Mutluay, Arzu
MECHANICAL PERFORMANCE OF CAD/CAM RESTORATIVE MATERIALS AFTER EROSIVE CHALLENGE

Thakur, Smriti Narayan
ROOT ACT AS A SURGICAL STENT FOR IMPLANT PLACEMENT IN LOWER MOLAR– A CASE REPORT

Tonogai, James
IS PASSIVE FIT IMPORTANT FOR CLINICAL SUCCESS?

Tonogai, James
LONG-TERM OUTCOMES FOR A PATIENT WITH FIXED IMPLANT-SUPPORTED PROSTHESES OVER A 27-YEAR PERIOD: CASE REPORT

Toska, Melania
CLINICAL DILEMMAS IN RESTORING TEETH IN THE ANTERIOR ESTHETIC REGION: CASE REPORT AND LITERATURE REVIEW

Tsai, Fu-Chuan
COMPARISON OF ACCURACY OF COMPLETE DENTURES FABRICATED WITH CAD/CAM TECHNOLOGY

Turk, Ayse Gozde
COMPARISON OF DIFFERENT CLEANSING AGENTS FOR DECONTAMINATION OF LITHIUM DISILICATE CERAMICS

Turkoglu, Pinar
USING DSD AND PROSTHETICALLY GUIDED ALL-ON-4 SURGERY FOR THE ESTHETIC AND FUNCTIONAL REHABILITATION OF EDENTULOUS MAXILLA

Turkoglu, Pinar
EFFECT OF IMPLANT ABUTMENT AND CEMENT COLOR ON THE FINAL COLOR OF MONOLITHIC ZIRCONIA CROWNS

Uluc, Irem Gokce
MAINTENANCE OF ONE-PIECE FULL-ARCH HYBRID PROSTHESES: SHORT TERM CLINICAL FOLLOW-UP

Van Der Linde, Schalk
A NOVEL SURGICAL GUIDE FOR LARGE MANDIBULAR DENTOALVEOLAR DEFECTS: AN APPROPRIATECH METHOD

Vardanyan, Anna
BIOMECHANICAL COMPARISON OF INCLINATION AND LENGTH OF IMPLANTS IN ALL-ON-FOUR CONCEPT BY FINITE ELEMENT METHOD.

Vardar Kosun, Nalan
PREPARING THE EMERGENCE PROFILE AND GINGIVAL CONTOUR IN IMPLANT SUPPORTED CROWNS: A CASE REPORT.

Varon- Shahar, Einat
A MURINE PERI-IMPLANTITIS MODEL: CHARACTERIZATION AND COMPARISON TO PERIODONTITIS

Vasilaki, Dimitra
PROSTHETIC OPTIONS AND CONSIDERATIONS FOR THE MISSING TOOTH IN THE ANTERIOR ESTHETIC REGION

Vavrickova, Lenka
DIGITAL VERSUS CONVENTIONAL IMPRESSION IN FIXED PROSTHODONTICS: THE PATIENTS´VIEW

Vervack, Valentin
A FULL-DIGITAL WORKFLOW FOR NANOCERAMIC ENDOCROWNS: A 1-YEAR PROSPECTIVE STUDY

Wang, Lili
SEVERE PERIODONTITIS-INDUCED DENTITION LOSS ALL-ON-4 IMMEDIATE IMPLANT RESTORATION SHORT-TERM EFFICACY OBSERVATION

Wang, Wan-Ting
THE EFFECT ON BOND STRENGTH OF NEW TYPE TISSUE CONDITIONER WITH ADDITION OF PMMA RESIN

Wang, Jie
ENHANCED OSSEOINTEGRATION AND BIOCOMPATIBILITY OF MG-AL-LDH NANOSHEET PATTERNED PORE-SEALED PEO BILAYER COATING ON MAGNESIUM

Wang, Ying-Hui
AESTHETIC RESTORATION OF MAXILLARY INCISOR WITH IMPLANT: A CASE REPORT

Wang, Yuhua
DIGITAL FOUR – DIMENSIONAL VIRTUAL PREDICTION AND REALIZATION TECHNOLOGY IN AESTHETIC RESTORATION OF ANTERIOR TEETH

Wang, Yake
COLOR STABILITY OF DUAL-CURED RESIN CEMENTS CONTAINING WITH OR WITHOUT ALTERNATIVE PHOTOINITIATORS

Watanabe, Takafumi
EVALUATION OF TREATMENT EFFECTS OF ORAL APPLIANCE AT DIFFERENT MANDIBULAR POSITIONS FOR PATIENTS WITH OSA

Wen, Jin
IGSF10: AN OLD/NEW FACTOR BENCHMARKED TO BMP2 AND IMPLICATIONS IN BONE REGENERATION

Wheeler, Julie
EVALUATION OF THE EFFECTS OF POLISHING SYSTEMS ON SURFACE ROUGHNESS AND MORPHOLOGY OF COMPOSITE RESIN

Wieczorek, Aneta
INFLUENCE OF ORAL HYGIENE ON FUNGAL GROWTH IN PATIENTS – USERS OF AN REMOVABLE DENTURES

Wiśniewska, Kamila
LYMPHATIC RESPONCE TO TRAUMA-INDUCED INFLAMMATION AFTER VITAL TEETH PREPARATION FOR FIXED PROSTHESIS

Wiśniewska, Kamila
THE EFFECT OF THE ER:YAG LASER DECONTAMINATION PROCESS ON THE SURFACE OF TWO TITANIUM ALLOYS

Wong, Jin Lin
SECTIONAL MAXILLARY COMPLETE DENTURE IN A PATIENT WITH MICROSTOMIA: A CLINICAL REPORT

Wu, Lin
EFFECT OF COLLIMATED AND FOCUSED LOW-INTENSITY PULSED ULTRASOUND STIMULATION ON BONE REPAIR

Wu, Yuqiong
FABRICATE A REMOVABLE PARTIAL DENTURE FOR A MICROSTOMIA PATIENT BY USING DIGITAL INTRAORAL IMPRESSION: A CLINICAL CASE REPORT

Xhajanka, Edit
THE CORRELATION BETWEEN CERVICAL AND BODY DAMAGES FROM USING OF THE MOBILE PHONE

Xin, Xianzhen
DELIVERY VEHICLE OF MUSCLE-DERIVED IRISIN BASED ON SILK/CALCIUM SILICATE/SODIUM ALGINATE COMPOSITE SCAFFOLD FOR BONE REGENERATION

Xiong, Yaoyang
OPTICAL AND MECHANICAL PROPERTIES OF NOVEL ZIRCONIA

Xu, Chun
THE APPLICATION OF INDIVIDUALIZED ABUTMENT-CROWN INTEGRATED PROVISIONAL RESTORATION IN OPTIMIZING THE PERI-IMPLANT SOFT TISSUE CONTOUR

Xu, Lianyi
HISTOLOGICAL CHANGE OF OSSIFICATION/OSSEOINTEGRATION WITHIN THE CENTER OF BMP-2 ENHANCED TISSUE-ENGINEERED BONE ON RABBIT MODELS

Xu, Yichen
THE PEEL BOND STRENGTH BETWEEN 3D-PRINTING CUSTOM TRAY MATERIALS AND ELASTOMERIC IMPRESSION/ADHESIVE SYSTEMS

Xu, Ling
THE USTLR2 MODIFIED BMSCS FOR ENHANCED BONE REGENERATION IN THE INFLAMMATORY MICRO-ENVIRONMENT

Yang, Hongye
RESVERATROL PRETREATMENT IMPROVES DENTIN BONDING DURABILITY

Yi, Yuseung
THE EFFECT OF CYCLIC LOADING ON CAD-CAM ABUTMENT IN MORSE TAPER INTERNAL TYPE IMPLANT

Yi, Lu
COMPARISON OF CROWN FITNESS AND USER-FRIENDLINESS BETWEEN TOOTH PREPARATION WITH ELECTRIC AND AIR-TURBINE HANDPIECES

Yıldırım, Hüsniye
THE EFFECT OF PLASMA TREATMENT ON RESIN BONDING TO CONTAMINATED MONOLITHIC ZIRCONIA

Yoon, Sena
TISSUE SURFACE ADAPTATION OF 3D-PRINTED COMPLETE DENTURE BASE: IN-VIVO STUDIES

Yu, Hao
EFFECTS OF STAINING BEVERAGES ON THE EFFECTIVENESS OF IN-OFFICE TOOTH BLEACHING: A RANDOMIZED CONTROLLED TRAIL

Yu, Chun-Hua
COMPARISON OF THREE CONSERVATIVE TREATMENTS FOR MYOFASCIAL PAIN WITH LIMITED MOUTH OPENING: A RETROSPECTIVE STUDY.

Yürük, Selen
BOND STRENGTH OF VARIOUS RESIN CEMENTS TO DENTINE CONTAMINATED WITH DIFFERENT RETRACTION SOLUTIONS

Zeng, Jianyu
INFLUENCE OF TWO PLANTING METHODS ON STRESS DISTRIBUTION WITHIN INSUFFICIENT AVAILABLE BONE WIDTH

Zeng, Deliang
ENHANCED OSSEOINTEGRATION AROUND BIOFUNCTIONAL POLYETHERETHERKETONE FABRICATED BY ELECTRON BEAN EVAPORTION

Zenziper, Eran
THERAPEUTIC APPROACHES, THE TREATMENT AND FOLLOW-UP OF HEAVY BRUXERS WITH FULL MOUTH REHABILITATIONS

Zhai, Ying
COMPARISON OF SUPPORTING-AREA OF COMPLETE DENTURES IN PATIENTS WITH DIFFERENT DEGREES OF BONE RESORPTION

Zhang, Shaoping
CONSERVATIVE MANAGEMENT OF DISCOLORED ANTERIOR TEETH: A CASE REPORT

Zhou, Yongsheng
3D PRINTING TECHNOLOGY FOR RESTORING TOOTH DEFECTS AND TOOTH LOSS.

Zhou, Yi
KERATINIZED MUCOSA AUGMENTATION BEFORE IMPLANT PLACEMENT? AN EXPERIMENTAL STUDY IN CANINE MODEL

Zhu, Ziyuan
DIGITALLY DESIGNED AND THREE-DIMENSIONAL PRINTED DIE FOR FIXED DENTURE FABRICATION

Živković, Rade
AN ANTHOPOMETRIC STUDY OF CRANIOFACIAL MEASUREMENTS AND THEIR CORRELATION WITH VERTICAL DIMENSION OF OCCLUSION

Zortuk, Mustafa
COMPARISON OF CONNECTION BETWEEN METAL FRAMEWORKS AND IMPLANT ABUTMENTS PRODUCED BY DIFFERENT METHODS: IN-VITRO STUDY